designed and manufactured in germany designed and manufactured in germany AXIOM130LN rev.1 www.axtal.com roemerring 9 drawing d1 fon: +49 (6261) 939834 d-74821 mosbach page 1(4) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg specification AXIOM130LN rev.: 1 date: 2015-01-19 oscillator type: low phase noise ocxo with sine wav e output equivalent to oscilloquartz model ocxo 8788 parameter min. typ. max. unit condition frequency range 5 20 mhz (note 2) standard frequencies 5.000 / 10.000 mhz (note 2) frequency stability initial tolerance @ +25c 200 ppb v c @ vref/2 vs. operating temperature range option 1 & 2 see tables 1 & 2 steady state vs. supply voltage variation (pushing) 0.2 ppb v s 5 % vs. load change (pulling) 0.2 ppb r l 10 % long term (aging) per day (note 3) 0.5 ppb after 30 days operation long term (aging) per year (note 3) 70 ppb after 30 days operation frequency adjustment range electronic frequency control (efc) 0.8 pp m efc voltage v c 0 vref/2 vref v efc slope ( ? f / ? v c ) positive efc nonlinearity 5 10 % efc input impedance 100 k? rf output signal waveform sine wave load r l 50 ? 10% output level +6 +8 +10 dbm harmonics -30 dbc spurious -75 dbc f nom 1 mhz warm-up time @ +25c 3 5 min ? f final /f 0 < 0.1 ppm 5.000 10.000 mhz phase noise max. -105 -135 -150 -157 -162 -162 -100 -130 -150 -157 -162 -162 dbc/hz dbc/hz dbc/hz dbc/hz dbc/hz dbc/hz @ 1 hz @ 10 hz @ 100 hz @ 1 khz @ 10 khz @ 100 khz short term stability (allan deviation) 110 -12 = 1 s reference voltage vref output 10.0 v supply voltage v s 11.4 12.0 12.6 v current consumption (steady state) 200 ma @ +25c current consumption (warm-up) 500 ma enclosure (see drawing) (lxwxh) 52.0x42.0x19.0 max. mm weight 70 g packing palette notes: 1. terminology and test conditions are according to ie c60679-1 and mil-prf-55310, unless otherwise stated 2. please consult factory for other frequencies 3. lower aging on request
designed and manufactured in germany designed and manufactured in germany AXIOM130LN rev.1 www.axtal.com roemerring 9 drawing d1 fon: +49 (6261) 939834 d-74821 mosbach page 2(4) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg absolute maximum ratings parameter min. max. unit condition supply voltage v s -0.5 v s + 10% v v s to gnd control voltage v c -0.5 15 v v c to gnd storage temperature -40 +125 c frequency stability vs. temperature stability lower temperature upper temperature option 1 [ppb] option 2 t [c] option 3 t [c] 05 5 0 0 a +50 10 10 1 -10 b +60 25 25 2 -20 c +70 50 50 3 -30 d +75 4 -40 e +80 table 1 table 2 standard: 1b = -10c to +60c ordering code model option 1 [stability] option 2 [temperature range] revision frequency [mhz] AXIOM130LN table 1 table 2 rev.1 10.000 example: AXIOM130LN-10-1b_rev.1 C 10.000 mhz handling and testing parameter procedure sourc e handling and testing application note axan-011 www. axtal.com processing application note axan-012 www.axtal.com parameter procedure condition electrostatic discharge (esd) thd devices iec60749-26 hbm 2000 v smd devices iec60749-27 mm 200 v washable yes no rohs- compliant yes no
designed and manufactured in germany designed and manufactured in germany AXIOM130LN rev.1 www.axtal.com roemerring 9 drawing d1 fon: +49 (6261) 939834 d-74821 mosbach page 3(4) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg enclosure drawing pin connections: pin # symbol function 1 gnd ground 2 v c control voltage (efc) 3 vref reference voltage 4 v s supply voltage 5 rf out rf output * s ee a pplication n ote axan - 011
designed and manufactured in germany designed and manufactured in germany AXIOM130LN rev.1 www.axtal.com roemerring 9 drawing d1 fon: +49 (6261) 939834 d-74821 mosbach page 4(4) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg environmental conditions test iec 60068 part iec 60679-1 clause mil-std- 202g method mil-std- 810f method mil-prf- 55310d clause test conditions (iec) sealing tests (if applicable) 2-17 5.6.2 112e 3.6.1.2 gross leak: test qc, fine leak: test qk solderability resistance to soldering heat 2-20 2-58 5.6.3 208h 210f 3.6.52 3.6.48 test ta method 1 test td 1 method 2 test td 2 method 2 shock* 2-27 5.6.8 213b 516.4 3.6.40 test ea, 3 x pe r axes 100g, 6 ms half-sine pulse vibration, sinusoidal* 2-6 5.6.7.1 201a 204d 516.4-4 3.6.38.1 3.6.38.2 test fc, 30 min per axes, 10 hz - 55 hz 0,75mm; 55 hz - 2 khz, 10g vibration, random* 2-64 5.6.7.3 214a 514.5 3.6.38.3 3.6.38.4 test fdb endurance tests - ageing - extended aging 5.7.1 5.7.2 108a 4.8.35 30 days @ 85c, ocxo @25c 1000h, 2000h, 8000h @85c revision history rev. drawing date [dd.mm.yyyy] remarks author checked 1 d0 14.01.2015 first issue hh bn 1 d1 19.01.2015 phase noise columns changed hh hh
|
